Harman Crown CDi DriveCore 2×300 Amplifier – 600 W RMS – 2 Channel

Harman Crown Cdi DriveCore 2×300 Amplifier

Breathe life into your audio system with the Harman Crown Cdi Drivecore amplifier, an excellent performer available at a competitive cost.

The CDi DriveCore 2|300 has been designed to work in places like restaurants, retail businesses, and more. The 2|300 is a 2-channel amp with network control/monitoring, high-level DSP, a front-panel interface, and support for driving up to 100Vrms speaker loads without the use of a transformer, designed for ease of usage in a variety of applications.

Experience amazing audio fidelity as the amplifier reduces the variability of component values and increases reliability. Simple to use with a variety of embedded features like network controlling and monitoring, an advanced DSP circuit, and a front-panel interface, this Cdi amplifier is equipped with 2 channels and BLU Link RJ45 connectors to receive and send 256 channels.

A clear, natural, and well-structured amplifier, the Harman Crown Cdi DriveCore 2×300 Amplifier is sure to impress all with its performance and is here to stay in the market!

• DriveCore technology increases the strength of a weak electrical signal
• Network control and monitoring
• On-board Digital Signal Processor allows custom configuration
• Direct drive 70/100 Vrms Output
• Front panel interface
• Programmable GPIO/AUX Port allows to recalling presets, mute channels, monitor faults, power on/off the amplifier
• Smartly manages power at 8 ohms impedance
• 2 Audio channels with 600 W RMS
• BLU-link up to 256 channels

Feature Comparison

SPECIFICATIONS:

BLU link: Yes

Channels: 2

Sensitivity (for full rated power at 8 ohms): 0.7V RMS

Rated Power Output (per channel @ 4 ohms): 600 W

Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz – 20kHz) at 8 ohms): > 104dB

THD (full rated power, 20 Hz – 20 kHz): 0.35%

Damping Factor (20 Hz to 100 Hz): > 1000

Frequency Response (8Ω, 20 Hz – 20 kHz): +/-0.5dB

Crosstalk (below rated power) 20 Hz to 1 kHz: > 80dB

Impedance: 8Ω

Maximum Frequency Response: 20 kHz

Input Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unbalanced

Ethernet: Yes

Operating Power Consumption: 300 W

Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion): 19 x 3.5 x 12.25

Weight: 14.56 lbs (6.6 kg)

Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 – 240V

WHAT’S IN THE BOX:

1 x Crown Audio CDi 2×300-2 Channel DriveCore Series Power Amplifier with BLU Link (600W)

2 x Terminal Block

1 x Power Cord

Warranty: Limited 3-Year Warranty