AGT Skid Steer 680 Hydraulic Concrete Breaker | AGT-SSHH-680A
$499.00
192
People watching this product now!
Payment Methods:
Description
Click here for more about our skid steer breaker
You can replace the breaker rod with the post driver rod.
Technical Details
| Operating weight | 550 lbs |
| Working pressure | 210 psi |
| Working flow | 9.5-16 GPM (36-60 L/min) |
| Impact rate | 500-900 BPM |
| Impact energy | 600 joule |
| Chisel diameter | 2.7″ (68mm) |
| Hydraulic hose diameter | 1/2″ |
| Ear spacing – inside | 10.2″ (258mm) |
| Ear spacing – outside | 11.4″ (290mm) |
| Pin center to center | 8.8″ (224mm) |
| Package Dimensions | 50.39“ × 24.01“ × 23.62″ |
| Shipping weight | 870.82 lbs |
Description
The Skid Steer Concrete Breaker, featuring a 2.7″ chisel, is perfect for tasks that require both light and medium effort, making it popular among demolishers, landscapers, and those working on construction sites.
With the striking power of up to 400-900 Blows Per Minute.
Solutions to common problems
The hammer is not working after the installation
-
Improper bushing replacement. Refit the inner bushing. Make sure to use the original.
-
Quick couplers are installed wrong. Check connectors and replace them as needed.
-
Supply hoses have been reversed. The pressure line from the pump must be connected to the port marked IN. The return line connects to the port marked OUT.
-
Nitrogen pressure is too high, Release nitrogen and recharge as needed.
Why does the hydraulic hammer suddenly stop hammering?
-
The backhead pressure is too high. Release nitrogen and recharge as specified.
-
The backhead is filled with oil. Disassemble the back head and replace the seal.
-
The control valve is stuck. Disassemble and clean the valve, and replace the worn valve.
-
Oil flow is not sufficient. Repair the pump, and adjust the hammer valve.
Nitrogen Pressure
Details
Includes
Reviews
Clear filtersThere are no reviews yet.